RJF2PEM1N

Amphenol Socapex's RJF2PEM1N revolutionizes Modular Connectors - Adapters technology for medical imaging equipment. Developed for MRI systems, this adapter provides ultra-low noise signal transmission while maintaining complete RF transparency in high-field (7T+) magnetic environments.The Jack, 8p8c (RJ45) interface utilizes non-ferromagnetic materials that introduce <0.1ppm magnetic susceptibility artifacts, critical for maintaining imaging homogeneity in diagnostic MRI scanners.For Jack, 8p8c (RJ45) connections, the adapter implements distributed capacitance matching that reduces eddy currents by 90% compared to conventional designs in gradient coil systems.This Coupler solution features SAR-compliant (Specific Absorption Rate) design that limits RF heating to <0.1W/kg during continuous operation at 300MHz for patient safety.Incorporating Circular Bayonet Coupling, the connector achieves 140dB dynamic range through its ultra-low noise (<1nV/ Hz) contacts for sensitive MRI receiver coils.The IP68 - Dust Tight, Waterproof rated enclosure meets IEC 60601-1 medical safety standards while withstanding 1000 sterilization cycles in hospital environments.Panel Mount, Square Flange configuration includes quick-disconnect mechanisms that enable fast patient table removal without compromising RF shielding integrity.Precision Metal Gland alignment ensures <0.2 angular accuracy for RF coil positioning in functional MRI studies.Compliant with Cat5e medical imaging standards, the adapter demonstrates <0.5% signal variation across 0-3T field strengths for consistent diagnostic quality.The Unshielded system employs multi-layer conductive polymers that provide 100dB attenuation at 64MHz (1.5T Larmor frequency) without magnetic interference.Constructed from Metal, Nickel Plated, the housing demonstrates USP Class VI biocompatibility for direct patient contact in interventional MRI procedures.