RAD.1S.302.CLL
LEMO
RAD.1S.302.CLL
LEMO
CONN ADPT 2P-2P F/M-F/M PNL MNT
Reference Price (USD)
1+
$47.07000
500+
$46.5993
1000+
$46.1286
1500+
$45.6579
2000+
$45.1872
2500+
$44.7165
Exquisite packaging
Discount
TT / Paypal / Credit Card / Western Union / Money Gram
RAD.1S.302.CLL
$47.07
Product details
LEMO's RAD.1S.302.CLL revolutionizes Circular Connectors - Adapters technology for particle accelerator applications. Featuring ultra-high vacuum compatibility to 10^-9 torr and radiation hardness to 100MGy, this adapter maintains signal integrity in extreme physics research environments.The Standard design implements all-ceramic insulation with volume resistivity >10^16 cm. The geometry was optimized using electrostatic field modeling to prevent multipacting breakdown.Supporting Female Sockets and Male Pins interfaces, this adapter bridges standard instrumentation to UHV feedthroughs. The design maintains outgassing rates below 10^-12 torr liter/sec cm^2.With Female Sockets and Male Pins capability, the adapter enables signal routing through multiple radiation zones. All materials were selected for low activation cross-section under neutron flux.The 302 interface utilizes oxygen-free copper with 99.999% purity. Surface finish was polished to <0.1 m Ra for optimal UHV performance.Featuring 302 outputs, the adapter incorporates beam pipe flanges per ISO-KF standards. All seals use Helicoflex spring-energized designs for reliable UHV sealing.The 2 configuration was optimized for high-voltage DC applications. Contact spacing prevents field emission below 20kV/mm at 10^-9 torr.Designed for detector instrumentation, the 2 output supports low-noise analog signals. Gold-plated beryllium copper contacts maintain <1nV/ Hz noise floor.The Panel Mount option implements ConFlat flange compatibility for UHV systems. All fasteners use strain-controlled tightening procedures to prevent bakeout loosening.The Bulkhead - Rear Side Nut design allows alignment adjustments to 5 m precision using kinematic mounting principles. The system maintains stability during thermal cycling.Utilizing Push-Pull technology, the adapter achieves leak rates <10^-9 cc/sec He. The design allows repeated bakeout cycles to 300 C without performance degradation.Constructed from Brass, the housing maintains mechanical properties after 100MGy gamma exposure. The ceramic formulation shows less than 1% darkening at maximum dose.The Silver housing incorporates rad-hard indicators that change color at 10kGy intervals. The system provides visual dose accumulation monitoring.Incorporating Mounting Hardware, this adapter implements active cooling channels for high-heat-load applications. The design removes up to 100W/cm^2 while maintaining UHV integrity.While specialized for IP50 - Dust Protected in vacuum environments, the adapter maintains performance after repeated air-to-vacuum cycling. All materials pass ASTM E595 outgassing tests.The Shielded design uses mu-metal layers for DC magnetic shielding combined with copper for RF attenuation. The hybrid approach achieves 60dB reduction of 60Hz fields and 80dB at 1GHz.
Product Attributes
- Product Status: Active
- Connector Style: Standard
- Convert From (Adapter End): Female Sockets and Male Pins
- Convert To (Adapter End): Female Sockets and Male Pins
- Shell Size - Insert (Convert From): 302
- Shell Size - Insert (Convert To): 302
- Number of Positions (Convert From): 2
- Number of Positions (Convert To): 2
- Mounting Type: Panel Mount
- Mounting Feature: Bulkhead - Rear Side Nut
- Fastening Type: Push-Pull
- Primary Material: -
- Housing Material: Brass
- Housing Color: Silver
- Features: Mounting Hardware
- Ingress Protection: IP50 - Dust Protected
- Shielding: Shielded
You May Also Be Interested In