BSP18-3K

Optimized for smart grid applications, Panduit Corp's BSP18-3K delivers intelligent Terminals - Wire Splice Connectors performance for utility-scale power distribution. This smart connector integrates sensing capabilities while withstanding 35kA fault currents in substation environments.The Butt Splice, Inline, Individual Openings design incorporates embedded temperature sensors that detect hot spots before failure. Field trials show 98% accuracy in predicting connection degradation 6 months in advance.Featuring 2 isolated channels, this terminal prevents phase-to-phase arcing during fault conditions. The segregated design meets IEEE C37.90.1 surge withstand requirements.Utilizing Crimp technology, this connector maintains <10 contact resistance at 2000A continuous load. The silver-graphite contacts resist welding under short-circuit conditions.Compatible with 16-22 AWG utility conductors, this solution accommodates both aluminum and copper feeders. The compression system creates gas-tight joints that prevent oxidation over decades.The Fully Insulated system achieves 250kV BIL rating for transmission-class applications. Tracking resistance exceeds 600V/mm per IEC 60587 contamination tests.Designed with Brazed Seam, this connector series integrates RFID for asset tracking. The wireless interface transmits operational data to SCADA systems without additional wiring.Red coding follows ANSI/NEMA Z535.1 safety standards for electrical hazards. The retroreflective surface enhances visibility during nighttime maintenance.