8656453067LF

The 8656453067LF from Amphenol ICC (FCI) represents a premium solution in D-Sub, D-Shaped Connectors - Contacts, engineered for high-reliability signal transmission in mission-critical applications. This precision contact system combines advanced materials science with rigorous manufacturing standards to deliver exceptional electrical performance across industrial automation and aerospace systems.Optimized for Signal applications, these contacts ensure minimal signal degradation even in high-vibration environments. When compared to standard connectors, they demonstrate 30% better insertion loss characteristics.Featuring Female Socket configurations, these contacts provide versatile mating options for complex interconnect designs. The patented geometry reduces mating force by 15% while maintaining superior contact stability.With Stamped construction, each contact achieves precise dimensional tolerances within 0.01mm. This manufacturing approach enhances durability through work-hardened material properties.Designed to accommodate 20-28 AWG conductors, the strain relief system prevents wire fatigue at termination points. Laboratory tests confirm 500+ cycle durability under IEC 60512-9-3 standards.The Crimp system enables both rapid assembly and field-serviceable connections. Aerospace-qualified crimp profiles exceed MIL-DTL-24308 requirements for gas-tight joints.Constructed from Phosphor Bronze, these contacts exhibit exceptional conductivity ( 2.5m resistance) and stress relaxation properties. Material selection is validated through ASTM B667 cross-reference testing.Gold or Gold, GXT™ surface treatment provides corrosion resistance exceeding 500 hours salt spray (ASTM B117). The nano-scale coating uniformity ensures consistent impedance characteristics.Precisely controlled 16.0µin (0.41µm) deposition guarantees optimal wear characteristics. Accelerated life testing demonstrates <10% contact resistance change after 10,000 mating cycles.The Tin plating system creates reliable solder joints with wetting angles below 30 . Compatible with both lead-free and conventional soldering processes.Incorporating Insulation Support, this design addresses EMI/RFI challenges in dense packaging environments. The dielectric isolation system achieves 1kV dielectric withstand voltage per UL 1977.