3044907

The Push In Clamp - Wire Entry Angled to Panel design incorporates self-cleaning tungsten contacts that resist sulfide formation in coastal wind farms. Field tests demonstrate 25-year maintenance-free operation despite salt spray exposure equivalent to IEC 60068-2-52.

Optimized for photovoltaic applications, the Push In Clamp - Wire Entry 90° to Panel options feature sunlight-resistant polymer housings that maintain mechanical properties after 15,000 hours of UV exposure per IEC 61215. The tin-plated copper alloy contacts prevent fretting corrosion in vibrating environments.

Available in 0.602" (15.30mm) dimensions, these terminals enable optimized string combiner box layouts. The extra-wide 71.56mm version accommodates parallel 600V DC inputs with 20mm arc flash protection gaps required by NEC 690.

Accommodating 0.039 ~ 0.098" (1.0 ~ 2.5mm) variations, the mounting system adapts to both thin aluminum enclosures and thick steel switchgear panels. The vibration-damping bushings survive 5G RMS random vibration per IEC 61400 for wind turbine nacelles.

With 2 configurations, system designers can create customized bypass diode networks for solar arrays. The symmetrical layout ensures balanced thermal distribution during partial shading conditions in 1500V DC systems.

The Snap Fit system exceeds IP68 requirements when used with provided gaskets. Submersion tests at DNV GL confirm 72-hour saltwater resistance at 10-meter depth for floating solar applications.

Precision 0.205" (5.20mm) spacing prevents tracking current formation in dust-laden environments. The hydrophobic silicone rubber inserts maintain >1000M insulation resistance after 1000 thermal cycles from -40 C to +85 C.

With 300 V rating, the terminals exceed CAT III 1500V safety requirements for photovoltaic system maintenance. The double-insulated construction provides reinforced protection against transient overvoltages from lightning strikes.

The 25 A capacity utilizes silver-graphite contacts that resist welding during fault currents up to 10kA. This performance has been verified through 100 short-circuit tests per UL 1059 for utility disconnects.

The 10-24 AWG compatibility range handles both thin sensor leads and thick battery interconnects. The dual-compression system accommodates aluminum conductors while preventing galvanic corrosion in utility-scale storage systems.

Gray options provide visual DC voltage level identification per IEC 60445. The pigment system withstands temperature extremes from -60 C to +120 C encountered in desert solar installations.

The 1 single-tier design minimizes thermal resistance in high-current battery interconnects. This flat architecture keeps temperature rise below 30K at 65A continuous current in containerized ESS units.