3004472

The 3004472 from Phoenix Contact delivers precision connectivity for medical equipment within the Terminal Blocks - Din Rail, Channel segment. Manufactured with biocompatible materials and cleanroom assembly processes, this terminal block meets stringent hospital equipment standards.Featuring Disconnect isolation, the design prevents leakage currents that could affect sensitive medical measurements. The enhanced insulation system maintains <1 A leakage even in defibrillation scenarios.The Fuse, Lever mechanism enables emergency circuit isolation without tools. The bright color-coded actuators provide clear status indication in low-light conditions.The 2 position configuration supports complex medical device wiring requirements. Each contact is individually shielded to prevent cross-talk between diagnostic circuits.With 1 isolated levels, the terminal block separates analog, digital, and power circuits effectively. This architecture reduces common-mode interference in patient-connected equipment.The 8.2mm terminal spacing exceeds medical safety standards for creepage distance. The smooth radius edges prevent insulation damage during frequent sterilization cycles.The Screw connection method ensures gas-tight joints for reliable operation in oxygen-rich environments. The captive contact design prevents loose parts in sterile fields.Rated for 6.3 A continuous operation, the terminal handles both signal and therapeutic current levels. The noble metal plating prevents oxidation that could affect measurement accuracy.With 500V working voltage, the component meets IEC 60601-1 requirements for medical electrical equipment. The insulation system withstands 4kV test pulses for patient safety.UL-listed for 12 A operation, the terminal block complies with ANSI/AAMI ES60601-1 medical safety standards. The fault current rating protects sensitive monitoring circuits.Certified for 600V per UL 60601-1, the component provides double insulation for patient-connected applications. The dielectric strength exceeds requirements by 30%.Accepting 10-26 AWG conductors, the terminals accommodate both flexible patient cables and rigid equipment wiring. The dual-stage strain relief protects delicate sensor leads.The Black housing meets hospital equipment color-coding standards. The non-porous surface resists bacterial growth and allows complete disinfectant coverage.Designed for 5mm x 20mm medical fuses, the protection system prevents hazardous energy transfer. The hermetically sealed fuse chamber maintains integrity in autoclave environments.