3-215911-4

The 3-215911-4 by TE Connectivity AMP Connectors delivers exceptional performance in Rectangular Connectors - Free Hanging, Panel Mount for marine and offshore applications. This corrosion-resistant interconnect system exceeds DNV-GL, ABS, and Lloyd's Register standards, providing reliable connectivity in the harshest saltwater environments.As a Receptacle solution, it features a triple-sealing design that maintains IP69K protection after 500 mating cycles. The stainless steel housing resists pitting corrosion in seawater splash zones.The Female Socket design utilizes marine-grade materials that withstand 1000-hour salt fog testing. The self-cleaning contact action removes surface contaminants during mating cycles.Available in 34 configurations, the connector supports both power distribution and shipboard communication networks. The segregated contact groups prevent galvanic corrosion between dissimilar metals.The 0.100" (2.54mm) spacing provides sufficient creepage distance for 1000V AC shipboard systems. The molded ribs between contacts prevent tracking in high-humidity conditions per IEC 60092.The 2 row arrangement positions power contacts for optimal heat dissipation. The thermal management design reduces hot-spot temperatures in enclosed marine panels.0.100" (2.54mm) separation between power and signal contacts prevents electromagnetic interference. This isolation is critical for reliable navigation and communication systems.The Free Hanging (In-Line), Right Angle version includes integrated cable glands meeting IEC 60092-350. The corrosion-resistant bronze hardware withstands constant saltwater exposure.Featuring IDC technology, the system accommodates tinned marine cables. The silver-plated termination surfaces resist sulfur-induced corrosion in bilge areas.Compatible with Ribbon Cable marine cables, the contacts maintain stable resistance through thermal cycling. The parallel contact springs compensate for vibration-induced relaxation.The Feed Through, Polarizing Key include integrated zinc sacrificial anodes for cathodic protection. These marine-specific features extend connector life in electrolytic environments.The Gold plating exceeds 2000-hour salt spray testing per ASTM B117. The thick gold flash on mating surfaces prevents fretting corrosion in vibrating environments.With 8.00µin (0.203µm) plating, the contacts maintain less than 5m resistance after extended saltwater immersion. The nickel barrier layer prevents base metal corrosion.The Gray housing incorporates UV-stabilized polymers that resist fading in direct sunlight. The high-visibility options improve safety in low-light engine room conditions.